Showing posts with label 1000mph. Show all posts
Showing posts with label 1000mph. Show all posts

Tuesday, 17 December 2013

Does Speed Kill?

  


Does Speed Kill?

(This post is featured in Surveyor Magazine - December 2013 edition)

We must decrease speed and make everyone safer. To do this designers are putting in vertical and horizontal realignments on existing roads. Speed limits are being reduced. Police cameras are being erected and mobile units despatched to stop this huge menace.
Except. That is not quite correct is it?

The amount of deaths on our roads is no longer decreasing substantially, and yet safer routes are being implemented every week. So what is going wrong?
Nothing in that sense, but everything in another.

We have bottomed out as a nation as far as casualties are concerned on the highway. In other words, you will never get zero deaths on the roads. It’s not possible. Stupidity, bad driving, lack of concentration, bad luck, weather, faulty mechanics – all these are random acts and are impossible to design out.

So should we stop trying to make our roads safer? No. However we’re going about it in the wrong way.


For starters I am not anti-camera, but I am anti-cameras being placed in the wrong locations.
It is a fact that mobile speed cameras and static speed cameras are placed to help reduce speeds, but they are not placed in the locations where they are needed for safety. Have you ever seen them outside schools or sports arenas? Or, outside hospitals or elderly residents housing complexes? NO. 

This is because camera units have to be self funding. If they were placed where they would be effective in deterring stupid driving, they wouldn’t generate income. So they are placed in areas where speeds are high, and this tends to be where speed limits are being broken. However, the public is not stupid. Many authorities are turning perfectly good 50mph or 40mph designed roads into 30mph roads. This is where the cameras are stationed. 

The natural speed of a road is not the limit, but the design speed curves, widths, verges and locations. A semi-urban 5m wide lane dual carriageway should never be 30mph, yet councils are reducing these speeds due to a problematic junction or roundabout further up the route. Their thinking is if the approach speed is reduced, then the accidents will reduce. However, my studies have concluded these types of accidents are due to low speed hesitations and mis-timings. Nothing to do with speed, but confidence - lack of, or too much of.

I have looked at hundreds of accident statistics over the years. Less than 1% of these accidents is due to speed alone. Most are non-concentration, carelessness, weather, drink/drugs or non-driver faults (i.e. pedestrian’s fault - very common). Yet there is a common belief that the road must be realigned and the speed reduced, as that is the only answer. This not only misses the point but means the majority of users on that road get a road which is slower for no apparent reason, and so naturally drivers drive to the design speed. I will mention this a lot, but designers must design to the natural speed and desire line of vehicles. 

Too many are designing to force drivers to follow white lines and speed limits that are clearly wrong. I will cover this in my next column.

The problem with reducing semi-urban road limits to 30mph, is that ‘genuine’ 30mph roads such as those in a built up location, means there is no formal reduction in a speed limit. 

As you can see in the pictures (above), why should both of these roads be 30mph? 

Drivers will clearly see a lack of danger in the semi-urban route. 

In fact we all know driving at 30mph past a school at 9am is more dangerous than driving at 90mph on a motorway. 

Not that you’ll find a speed camera outside a school, but you’ll find a camera over the M4 near Chippenham!


Find The Engineer

www.findtheengineer.com

0845 021 2468

Monday, 10 June 2013

Interview With Bloodhound SSC




Interview with Bloodhound SSC

Find The Engineer Presents the 1000mph Car!

    


The British have held the land speed record for 70 of the 112 years of its existence. These cars epitomise the highest possible levels of technology for their age and the very high speeds achieved represent true pioneering and engineering excellence. The current record is held by Richard Noble’s Thrust SSC driven by Andy Green. Now, there is a new challenger from Bristol who is looking to break his own record. Richard Noble, again, is heading up the Bloodhound SSC project.

Find The Engineer’s Mark Ralph caught up with long time friend Mark Elvin, who has worked in the past for Westland Helicopters, Williams F1 team and then designed race transporters for F1. Now a Bloodhound design engineer, Mark is designing many parts of the vehicle including its famous fin.

“This is by far the best job I’ve ever had. It’s truly mad! It uses all your brainpower and knowledge as an engineer to overcome huge hurdles on aerodynamics as well as looking to keep the vehicle as light as possible lightweight and on budget – which varies.”

The Thrust SSC car driven by RAF pilot Andy Green was the first land vehicle to break the sound barrier, establishing the first ever supersonic land speed record at 763.035mph in October 1997. A record which still stands.

Richard Noble who ran the Thrust SSC project decided to build the Bloodhound SSC to break his own record stop the Americans from taking it & above all, to act as a showcase for engineering as a career “You see”, continues Mark “1000mph on land is the next Concorde moment”.

The car is named after the Bristol Bloodhound missile, which could do over Mach1 in 2.6 seconds from takeoff & shares the same chief aerodynamicist, Ron Ayers.


As an iconic engineering programme it is run through schools, with the hope it will stimulate a new generation of engineers. “I have been to auto shows and events, including my daughters’ school and the excitement from everyone you talk to is immense.”





The research element of the programme to produce the first 1000mph car has taken far longer to develop than expected but now the Bloodhound team has a safe and viable design for the world’s first 1000mph 133,000hp car.

With companies, schools, universities and colleges taking part, the team plans to build and roll-out in late 2013, UK runway testing early 2013 in preparation for low speed test runs in South Africa late 2014 (up to 850mph, taking a new land speed record in the process) & the full fat, 1000mph runs during 2015.

The car (yes it has four wheels and a steering wheel – of sorts), uses a formula 1 car engine just to power its rocket oxidizer pump, a hybrid rocket  and an EJ200 jet engine from a Typhoon fighter plane, but the Bloodhound SSC shape is completely different to anything seen before. The car needs to minimise the cross-sectional area to minimise drag, whilst remaining ‘lift neutral’ at all speeds to ensure the car stays safely on the ground.

“In the design, packaging of all the components including Andy (the driver) has been a difficult issue. He and his cockpit have ended up just under the EJ200 intake, with the cockpit external shape being a part of the all important intake shock management structure. Andy has lost out on comfort value there, but that’s one of the compromises that have been necessary in developing a Mach 1.4 car.”

Land-speed record cars have had big fins to ensure good stability. But too much fin means a car which will severely be affected by increased drag and not enough fin means that the car will be directionally unstable. The designers believe that Bloodhound SSC will have excellent directional stability.
So will they do it? If you spend a short time with any of the team you will be convinced they will easily break 1000mph. “My only worry is not if we will reach 1000mph, but what I will do after this. Where can you go from here?”
Good point Mark, so what do you do when you’re not travelling the UK or making the fastest car in the world?
“It’s difficult to unwind, but normal stuff. Sleep! Beating you on the Xbox, swimming, cycling, be a husband to a lovely wife & being a taxi in a normal car, to my two lovely daughters.”
The Bloodhound SSC team are touring the UK and were based near the SS Great Britain in Bristol – in a shed! Now they are in large premises in Avonmouth near the Severn. 

Visit their website for updates. www.bloodhoundssc.com




Call us today on 0845 021 2-4-6-8

www.findtheengineer.com